Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Modesto?
A chimney liner installation in Modesto typically runs $2,400 to $5,800 for a standard single-story flue, while a partial rebuild of the chimney crown and upper masonry usually lands between $1,800 and $6,500. A full chimney rebuild on a two-story home can reach $9,000 or more when the entire stack above the roofline has to come down and be rebuilt. The number that matters most is always the one on your written estimate, because no two flues in Modesto are in the same condition.
We’re Modesto Chimney Sweep, and we handle inspection, sweeping, and repair with the same crew from start to finish. That matters for a pricing page, because a sweep-only company often finds a cracked liner during cleaning and has to hand you off to someone else. We fix what we find whenever the job allows it in the same visit. This guide breaks down what liner and rebuild work actually costs in the Modesto market for 2026, what moves the price up or down, and how to avoid paying for work you don’t need.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the individual pieces of a reline or rebuild are typically priced in Modesto this year. These are estimated ranges for planning; your written estimate sets the final price.
| Work Item | Typical Cost Range |
|---|---|
| Level 2 chimney inspection (camera scan of the flue) | $150 – $350 |
| Stainless steel flexible liner install, single-story, standard run | $2,400 – $4,200 |
| Stainless steel flexible liner, two-story or long/offset run | $3,800 – $5,800 |
| Insulated liner upgrade (for better draft and performance) | adds $400 – $900 |
| Top plate, cap, and connector fittings | $250 – $700 |
| HeatShield flue resurfacing (restore liner without tear-out) | $1,200 – $3,200 |
| Crown repair or rebuild | $800 – $2,500 |
| Partial masonry rebuild (upper stack above roofline) | $1,800 – $6,500 |
| Full chimney rebuild (stack down to the roofline) | $5,000 – $9,000+ |
| New cap and cover (Gelco or Famco) | $250 – $600 |
What pushes a project toward the top of those ranges? Access is the big one. A liner run that goes straight up a single flue is the simplest job we do with DuraFlex flexible liner systems. Add a two-story chase, an offset where the flue jogs sideways, or an old clay liner that has to be cleared, and the labor and materials climb. Rebuilds get expensive when hidden water damage or crumbling mortar turns up once the outer masonry comes off. Materials from established suppliers like Copperfield, Olympia Chimney, Gelco, and Famco cost more than generic parts, which is why we use them: they’re the components specified by chimney professionals, and the manufacturer warranty travels with the finished repair.
One clarification on the table. Some companies list a separate fee to come out and look. Our estimates are free, and the estimate tells you exactly which of these line items you actually need.
What Affects Chimney Liner & Rebuild Pricing in Modesto
A handful of factors drive the number on your estimate more than any other. Here’s what we look at before we quote a Modesto job.
- Liner length and flue arrangement. A straight, single-story flue needs a shorter, simpler liner run. An offset flue or a tall two-story chase means more material and more labor to route the liner and the insulation correctly.
- Condition of the existing flue. If the clay tiles are intact, a flexible liner installs cleanly. If they’re cracked or spalling, we may need to address that first, and in some cases HeatShield resurfacing restores the flue without a full removal. We inspect before we sweep, because cleaning a damaged flue without fixing it first is a safety risk, not a service.
- The appliance venting through the chimney. A wood-burning fireplace, a gas appliance, and a wood stove each call for a different liner size and rating. Matching the liner to the appliance is part of what you’re paying for; a wrong-sized liner drafts poorly and can fail inspection.
- Masonry condition above the roofline. Central Valley summers bake masonry and the occasional wet winter soaks it. Mortar joints above the roofline take the brunt, and crown cracks let water in. A rebuild quote depends heavily on how much of that upper stack needs mortar replaced versus full replacement of the brick.
- Height and access. A taller chimney on a steeper-pitch roof takes more time to reach and secure safely. This is a real cost line, not padding.
- Cap and cover work. A missing or rusted cap is often the root cause of the water damage that makes a rebuild necessary. The right cap stops the problem before it starts, and we install Gelco and Famco covers built to last. Adding one to a reline job is far cheaper than fixing the damage it prevents.
How to Save on Chimney Liner & Rebuild
You don’t have to cut corners on a chimney to keep the cost down. You have to catch problems while they’re small, and you have to avoid paying for work you don’t need. Here’s how that plays out in practice.
Repair before you rebuild. A full rebuild is the most expensive option on this page. When the damage is confined to the flue liner and the surrounding masonry is sound, HeatShield flue resurfacing can restore the liner without tearing the chimney out, at a fraction of the rebuild cost. A camera inspection tells us whether that’s a real option or not, and we’ll say so either way.
Don’t skip the annual inspection. A Level 2 inspection and a sweep cost a small fraction of relining or rebuilding. Most of the expensive jobs we see start as a small crown crack or a missing cap that let in water over a couple of seasons. Catch it early and the fix is modest.
Fix the cap the first time. A cheap, ill-fitting cap rusts out or lets water run behind it, and you pay twice. We install Gelco and Famco covers sized to your flue, which keeps repairs weather-tight and prevents the repeat service call.
Bundle work into one visit. Sweep, inspection, and repair handled by one crew saves you from coordinating a sweep with a separate mason and a separate liner installer. When we find a problem during a cleaning, we fix it in the same visit whenever the job allows. Ask about combining a cap install with a reline while the scaffolding is already up.
Get the free estimate in writing. A written, itemized estimate shows you exactly what you’re paying for. Our estimates are free and the price is set per job, so the number on paper is the number you agree to. Call (855) 360-6515 and we’ll book a time to look at your flue.
Which Is Cheaper: Repair or Replace?
Repair is almost always cheaper than replacement when the masonry structure is intact and only the flue liner needs attention. HeatShield flue resurfacing typically runs $1,200 to $3,200, well below a full liner install or a rebuild. Replacement makes more sense when the clay liner is badly deteriorated, when the masonry above the roofline is crumbling, or when the existing system never met the size and rating your appliance needs.
The honest answer is that it depends on what the camera shows inside the flue. That’s why we start with an inspection rather than a sales pitch. Call (855) 360-6515 for a free estimate and a straight recommendation on repair versus replace.
Why Use Professional-Grade Liner and Repair Materials?
Professional-grade materials cost more than hardware-store patches, and they’re worth it on a chimney. We install DuraFlex flexible liner systems, a professional relining product that most sweep-only companies can’t offer. We apply HeatShield, a factory-engineered flue resurfacing product that carries its own manufacturer warranty. And we source caps, tops, and components from Copperfield, Olympia Chimney, Gelco, and Famco, so the parts on your chimney are the ones industry professionals specify. When the material is manufacturer-backed, the product warranty travels with the completed repair, which a generic part can’t give you.
Do I Need a Liner or a Full Rebuild?
A liner is the right call when the flue is structurally sound but the liner is cracked, missing, or the wrong size for your appliance. A rebuild is the right call when the masonry itself is failing: loose bricks, crumbling mortar above the roofline, or a crown that’s no longer shedding water. A camera inspection shows us which situation you’re in, and we inspect before we sweep so the diagnosis is accurate. If the flue can be restored with HeatShield or relined with DuraFlex without a teardown, we’ll tell you so.
Our technicians have up to 9 years of experience reading exactly these signs. Call (855) 360-6515 for a free estimate.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Modesto?
A stainless steel chimney liner in Modesto typically costs $2,400 to $5,800, depending on the height of the flue, whether it’s single-story or two-story, and whether the run is straight or has an offset. Insulation and a new top plate add to that. Call (855) 360-6515 for an exact quote, and estimates are free.
How much does a chimney rebuild cost in Modesto?
A partial rebuild above the roofline typically runs $1,800 to $6,500, and a full rebuild of the stack can reach $5,000 to $9,000 or more. The range depends on how much masonry needs replacing and how tall the chimney is. Call (855) 360-6515 for a free estimate on your specific chimney.
Can a damaged chimney liner be repaired without rebuilding the chimney?
Yes, in many cases. HeatShield flue resurfacing typically costs $1,200 to $3,200 and restores a compromised flue liner without tearing out the chimney. It’s the non-demolition repair method we use when the surrounding masonry is still sound. Call (855) 360-6515 to find out if your flue qualifies.
Is it cheaper to reline or rebuild?
Relining is usually cheaper. A DuraFlex liner install in the $2,400 to $5,800 range is far less than a $5,000 to $9,000 rebuild. A rebuild is only necessary when the masonry itself is failing, not just the liner. Call (855) 360-6515 and we’ll tell you which one you actually need.
Do you offer free estimates on chimney liner and rebuild work?
Yes, our estimates are free, and the written estimate sets the price per job. We inspect the flue, explain the options, and put the number in writing before any work starts. Call (855) 360-6515. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Chimney Liner & Rebuild Estimate in Modesto
Whether you’re dealing with a cracked clay liner, a crumbling crown, or a chimney that’s been leaking for a couple of seasons, the next step is a camera inspection and a written estimate. We handle the inspection, the sweep, and the repair with one crew, using DuraFlex liner systems, HeatShield resurfacing, and components from Copperfield, Olympia Chimney, Gelco, and Famco. Call (855) 360-6515 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Modesto market as of 2026. Modesto Chimney Sweep offers free estimates – call (855) 360-6515.
Written by the team at Modesto Chimney Sweep.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Kevin Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Nicole Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Claudia Flores