Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Modesto Homeowners
A chimney inspection in Modesto is the only reliable way to know whether the flue venting your fireplace or gas appliance is safe to use. Soot hides cracks, gaps, and failed joints that you can’t see from the hearth, and a wood-burning chimney that hasn’t been checked in a few seasons can carry creosote buildup that leads to a chimney fire. Our technicians have up to 9 years of experience and inspect before we sweep, because cleaning a damaged flue without fixing it first is a safety risk, not a service. We’re part of Modesto Chimney Sweep, handling inspection, cleaning, and repair with one crew from start to finish, and our camera work means nothing is recommended without evidence you can look at yourself. Call (855) 360-6515 and we’ll book your inspection.
Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke chamber, and the visible portions of the flue, and it’s what we recommend before the first burn of the season or after any change to how the fireplace performs. You need one if smoke rolls into the room, the damper sticks, or you’ve noticed crumbling mortar around the firebox. We open the firebox, check the damper operation, look at the smoke shelf and chamber for gaps, and confirm the flue is clear and intact. Standard inspections with a camera run in the same range as our general inspection pricing, typically $150 to $350 depending on access and whether a sweep is included. Call (855) 360-6515 for an exact quote.
What We Check in the Firebox
We look at brick faces, mortar joints, and the fireback for spalling, cracking, or gaps that let heat reach the structure behind. A firebox with open joints can pass heat into framing, so we flag it even when the fireplace still draws well.
The damper gets a full cycle test. A damper that won’t open fully or won’t seal is a draft and efficiency problem, and often a simple hardware replacement.
When a Fireplace Needs More Than a Look
If the firebox has cracks wider than a hairline, or the smoke chamber has heavy buildup and rough parging, we recommend repair before the next fire. Our Modesto inspections include a written summary with photos so you can see exactly what we found.
We’ll tell you plainly when a repair can safely wait and when it can’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services at Modesto Chimney Sweep cover three levels of evaluation: a basic visual check, a camera-assisted inspection of accessible flue interiors, and a full inspection for real estate transactions or after a chimney fire. You need them whenever you buy or sell a home, change fuel type, install a new appliance, or go more than a year without a sweep. Every service includes a photo report of what we found, an explanation of what it means, and a written estimate for any repair. Inspections typically run $150 to $350 depending on level and access. Call (855) 360-6515.
Visual Checks and Camera Work
A visual check covers the firebox, damper, visible flue, cap, crown, and flashing from the ground and roofline where accessible. Camera work goes further, letting us see the interior of the flue, offsets, and the top of the liner without demolition.
Most homes need the camera inspection because the flue interior is where the costly surprises live.

When to Book an Inspection
Book one before burning season starts, after any chimney fire, when you notice smoke or odor problems, or when a home sale is in motion. First-time buyers in Bystrom and nearby towns often ask us to inspect before closing.
We’ll schedule around your timeline and give you a plain-spoken summary.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the liner and the passage your smoke travels through, and it’s the single most important check on a wood-burning system. You need one whenever the fireplace smokes, when creosote has built up heavily, after a chimney fire, or when an appliance is being installed or replaced. We run a camera down the flue, look for cracked tiles, gaps at the joints, missing mortar, and evidence of heat damage, and we check the top termination and cap. Standard inspections typically run $150 to $350. Relining work, if needed, is quoted separately after you’ve seen the photos. Call (855) 360-6515.
Reading the Liner
Clay tile liners are vulnerable to cracking when a hot fire meets a cold flue, and gaps between tiles let smoke and heat reach the masonry. We document each joint we can see.
When the liner is compromised, we discuss relining with a DuraFlex flexible liner system, which most sweep-only companies can’t install.
Termination and Top End
The top of the flue is where water enters and where animals nest. We check the cap, screen, crown, and the top few courses of the flue, and we note any missing mortar.
We install Gelco and Famco caps and covers built to keep the weather out and last.
Chimney Fire
Chimney Fire damage is often invisible from the hearth, which is why any home that has had one needs a full inspection before the chimney is used again. You need this check if you’ve heard a roaring sound from the flue, seen sparks or flames at the top, smelled a strong burning odor, or found puffy, honeycombed creosote. We inspect the flue interior for heat damage, cracked tiles, warped dampers, and compromised mortar, and we can restore a damaged flue liner with HeatShield resurfacing rather than tearing out the chimney. Inspections typically run $150 to $350, with repair quoted separately. Call (855) 360-6515.
What a Chimney Fire Leaves Behind
The heat can crack tile liners, distort dampers, and damage the smoke chamber even when the fire was brief. These are the failures that later let carbon monoxide or heat into the home.
We document every finding with the camera so you’re not guessing at what the fire did.
Getting the Flue Back in Service
Where the liner is cracked but the chimney structure is sound, HeatShield resurfacing restores the flue without demolition. Where the liner has failed structurally, we reline with a DuraFlex system.
No repair is recommended without photos you can review. That’s how we work.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the camera-based inspection required when a home changes hands, when a fuel type or appliance changes, or after a chimney fire or earthquake. It goes beyond a visual check to examine the accessible interior of the flue, the attic and crawl space where the chimney passes, and the exterior components. We perform Level 2 inspections with a camera system, document every joint and transition, and deliver a photo report. Pricing typically runs $150 to $350 depending on roof access and appliance count. Call (855) 360-6515 to book one.
What the Level 2 Covers
The inspection includes the firebox, damper, smoke chamber, flue interior, cap, crown, flashing, and the chimney’s path through the structure. We also check for combustible clearances.
Real estate transactions often require this level, and our written report is formatted to be useful to buyers, sellers, and agents.
How the Camera Changes the Outcome
The flue camera shows what a flashlight can’t reach. Offsets, tile gaps, and heavy creosote are visible on screen and captured in photos.
You see what we see, which answers the real worry: being told you need work you can’t verify.
Chimney Leak
Chimney Leak symptoms – stains on the ceiling, damp masonry, a musty smell after rain – usually trace back to a failed cap, cracked crown, damaged flashing, or open mortar joints. You need an inspection when water is getting in, and you need it before the damage spreads into framing and interior finishes. We examine the cap, crown, flashing at the roofline, and masonry joints, then trace where the water is actually entering rather than guessing. Leak inspections typically run $150 to $350; repairs are quoted separately. Call (855) 360-6515.
Tracing the Water Path
Water travels, so the stain on your ceiling is rarely directly under the defect. We check the top first, then work down through the flashing and joints.
A camera view of the flue interior also confirms whether a lined flue has water intrusion at the top.
Stopping Repeat Problems
A properly fitted cap and cover stops most leaks from starting. We install Gelco and Famco covers sized to your flue.
Cracked crowns and failed flashing get repaired so the fix holds through Modesto’s wet winters.
Chimney Camera Inspection
Chimney Camera Inspection is the step that turns a vague recommendation into proof. We thread a camera down the flue and record what it sees so you can watch the interior of your own chimney on screen. You need one whenever a company says you need relining, after a fire, when the fireplace smokes, or when you’re buying a home. The camera reveals cracks, gaps, creosote condition, missing mortar, and damage that no one can see otherwise. Camera inspections typically run $150 to $350. Call (855) 360-6515.
Equipment We Use
Our camera systems handle offsets and transitions that older rigid cameras miss, and they record the whole run. Every finding is timestamped in a photo report.
We include the recording with the inspection so there’s a record for later.
The Photo Report
You’ll get a written summary with the photos attached and a plain explanation of each finding. We tell you what can wait and what shouldn’t.
If we recommend relining with a DuraFlex liner or resurfacing with HeatShield, you’ll have already seen why.
Brands We Service
We work with chimney and venting components from the brands industry professionals specify. Olympia Chimney is a name we see in liner systems and venting assemblies, and we know the failure points at the joints where these systems typically wear out. Copperfield is another supplier we work with for liner components, and we understand what proper installation looks like so we can spot the shortcuts others take.
We install DuraFlex flexible liner systems for relining and HeatShield for flue resurfacing, and we use Gelco and Famco caps and covers because those components hold up through Modesto’s hot summers and wet winters. Whether you have Olympia Chimney, Copperfield, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Strong odor from the fireplace, especially in warm weather. That smell is often creosote or moisture in the flue, and it can signal heavy buildup or a leak. Both are worth a look before you burn again.
- Smoke rolling into the room instead of up the flue. This can mean a blocked flue, a failed damper, or a pressure problem. A camera inspection usually finds the cause quickly.
- Stains on the ceiling near the chimney or damp masonry. Water is entering somewhere, and the leak path is rarely obvious. Getting it checked before the first rain keeps the damage from spreading.
- Crumbling mortar, cracked tiles, or pieces of liner in the firebox. Liner material that falls into the firebox means the flue is compromised. Stop using the fireplace until it’s inspected.
- A chimney fire you heard or suspect. Even a brief fire can crack a tile liner or warp a damper. The chimney shouldn’t be used again until it’s inspected with a camera.
Our Process, Step by Step
- 1
Talk through what’s happening. We ask about how the fireplace burns, what you’ve noticed, and any past repairs. That history shapes what we look for.
- 2
Inspect before we sweep. We check the firebox, damper, flue, cap, and flashing first, so cleaning never pushes soot through a damaged liner.
- 3
Run the camera. A camera down the flue shows the interior at each joint and offset. You watch the screen with us.
- 4
Write up what we found. You get a photo report and a plain explanation of each finding, including what can safely wait.
- 5
Quote the repair in writing. If work is needed, the written estimate sets the price. Nothing is added later.
How Much Does Chimney Inspection Cost in Modesto?
Chimney inspection pricing in Modesto depends mostly on the level of inspection and how accessible the chimney is. A typical standard inspection runs $150 to $250 depending on access and whether a sweep is included. A camera inspection that documents the flue interior and includes a photo report runs $200 to $350. A Level 2 inspection for a real estate transaction or after a chimney fire, which covers the flue interior plus attic, crawl space, and exterior components, runs $250 to $350.
What moves the price: roof access and pitch, the number of appliances venting through the chimney, whether offsets make the flue interior harder to reach with the camera, and whether a sweep is bundled. A single wood-burning fireplace is simpler than a chimney with two flues and a gas appliance vented alongside.
How to avoid overpaying: ask for the inspection level up front, ask whether the camera is included, and ask for photos of any problem before you authorize repair. If someone recommends relining without showing you the flue interior, get a second opinion. We never recommend work you can’t see the evidence for, and we tell you when a repair can safely wait a season.
Our estimates are free, and the written estimate sets the final price. Call (855) 360-6515 for an exact quote.
Our Service Area Near Modesto
We inspect chimneys across West Modesto and the surrounding towns, including Ceres, Empire, Riverbank, Keyes, Hughson, Oakdale, Turlock, Waterford, and Bret Harte. Most appointments in the immediate Modesto area are booked within a couple of days, and the outlying towns usually fit into the same week. If you’re scheduling an inspection before burning season, earlier is better, since our calendar fills as the weather cools.
Serving Modesto, CA – Our Local Coverage Area
We serve Modesto and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Modesto
A chimney inspection is an evaluation of your fireplace and flue to confirm they’re safe to use and up to code. It covers the firebox, damper, smoke chamber, flue interior, cap, crown, and flashing. We use a camera to see inside the flue, and we give you a photo report of what we found. Call (855) 360-6515 for an exact quote.
A standard inspection takes about 45 minutes to an hour, and a Level 2 camera inspection usually runs 60 to 90 minutes. Access to the roof and attic adds time. If a sweep is included, plan on a bit longer. Call (855) 360-6515 to schedule.
Most inspections run $150 to $350, depending on the level and access. Camera inspections and Level 2 inspections for real estate or post-fire situations sit at the higher end. The written estimate sets the final price, and estimates are free. Call (855) 360-6515 for an exact quote.
Yes. We work with Olympia Chimney components and install DuraFlex flexible liner systems for relining. We also apply HeatShield flue resurfacing and install Gelco and Famco caps and covers. Whether your system uses one of those brands or another make, we can inspect and repair it. Call (855) 360-6515.
Same-day service is often available when the schedule allows. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 360-6515 to check availability.
Manufacturer warranties travel with the products we install, including DuraFlex liner systems and HeatShield resurfacing. That’s one reason we use manufacturer-backed materials rather than hardware-store patches. Ask us at the estimate what coverage applies to your specific repair. Call (855) 360-6515 with questions.
Clear the area around the hearth, move any fireplace tools and screens out of the way, and make sure we can reach the attic access if a Level 2 inspection is scheduled. Don’t burn anything for at least 24 hours before the appointment. If you have pets, secure them during the visit. Call (855) 360-6515 to confirm your appointment details.
Schedule Your Chimney Inspection Service in Modesto Today
An inspection is the cheapest way to find out whether your chimney is safe, and the only way to know before a small problem becomes a relining job. We inspect before we sweep, document everything with photos, and tell you plainly when work can wait. Call (855) 360-6515 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Modesto Chimney Sweep.