Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Ceres, CA
Chimney inspection in Ceres starts with one fact: most of the fireplaces here are original to houses built between the 1950s and 1970s, and a clay tile flue that old has usually cracked somewhere you can’t see from the hearth. We inspect before we sweep, because cleaning a damaged flue without fixing it first is a safety risk, not a service. In a Central Valley town where winter tule fog traps smoke close to the ground for days at a time, how well your chimney drafts and how clean it burns stops being a private matter and starts affecting the block. Call (855) 360-6515 to book an inspection.
Why Ceres Homes Are Different
Ceres sits in California’s Central Valley, and the geography shapes the work more than most homeowners realize. On cold winter nights a temperature inversion settles over the valley floor and holds smoke and particulate matter near the ground. A chimney that’s dirty or drawing poorly doesn’t just back up into your living room here; the whole neighborhood breathes it. That’s why draft, cap integrity and creosote control matter more in Ceres than in a town with steady breezes.
The housing stock reinforces it. The 95307 ZIP is full of mid-century and late-20th-century single-family homes, many of them 1950s to 1970s ranch-style and stucco tract houses. Their original masonry fireplaces and clay tile flues are now 40 to 60 years old. That’s the age range where hairline cracks in the tiles, failed mortar joints and missing crown sections show up on inspection. Fireplaces in these homes sit idle through hot, dry summers, then get heavy use during December through February cold snaps. The first fall rains after a long dry season often expose cracked crowns and loose caps on those 1960s brick fireplaces, and on tule fog nights a smoking chimney is obvious up and down the block.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Ceres Services
Two jobs account for most of the calls we get from Ceres homeowners, and both begin with a look at the flue before anything is cleaned.
Chimney Sweep in Ceres
A routine sweep removes the creosote and soot that build up during those concentrated winter burning months, but in Ceres it also means checking what the cleaning reveals. A 1960s clay tile flue that swept fine a decade ago can have a cracked tile or a spalled joint now, and a sweep is the moment that gets caught. We use drop cloths and a sealed vacuum so nothing drifts into the room, and we photograph what we find. When sweeping turns up damage, the same crew can move into repair rather than sending you off to find someone else. To book a chimney sweep, give us a call.

Chimney Repair in Ceres
Repair in Ceres usually means addressing the slow wear that mid-century masonry shows after decades of dry summers and damp winters. Cracked flue tiles get relined with a DuraFlex flexible liner system, and compromised flue walls get resurfaced with HeatShield rather than torn out. Both are professional-grade methods, not hardware-store patches, and both come with manufacturer backing. Crowns get rebuilt, caps get replaced, and mortar joints get repointed where the weather has worked them loose. If the chimney is sound, we tell you that too and leave it alone. For chimney repair, start with an inspection and we’ll show you what we see.

Chimney Inspection in Ceres
Chimney inspection in Ceres answers a question most homeowners here can’t answer on their own: is a 40 to 60 year old clay tile flue still sound enough to burn in? The 95307 corridor is full of original masonry fireplaces from the ranch-house boom, and their flues were laid with clay tiles and mortar that age badly in a valley climate of dry summers and cool, foggy winters. A visual check from the hearth and a look at the exterior crown catches some of it. A proper Chimney Inspection catches the rest, including cracks and gaps you simply cannot see from below. We inspect before we sweep because cleaning a damaged flue without fixing it first is a safety risk, not a service.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is what you want after a chimney fire, when you’ve changed appliances or relined, or when you’ve just bought a Ceres house and have no service history for the flue.
What it costs in Ceres
Most Level 2 chimney inspections in Ceres run about $150 to $350, with the written estimate fixing the final price once we’ve seen the flue.
How we do it
We run a camera through the full flue, check the firebox, damper, smoke chamber and crown, examine accessible portions of the exterior, and hand you a photo record of what the camera saw.
Chimney Fire
Signs you need it
Puffy, honeycombed creosote, dark staining around the damper, or a crack you can see in the flue tiles are all warnings that a chimney fire has already happened or is waiting to.
What it costs in Ceres
Inspecting and cleaning after a chimney fire typically runs $200 to $600, and any needed relining groups into the repair range of roughly $1,800 to $4,500 for a standard flue.
How we do it
We inspect the full flue with a camera for heat damage, clean out the creosote and debris, then tell you honestly whether the tiles survived or the flue needs relining.
What Chimney Inspection Costs in Ceres
Inspection pricing in Ceres depends on the level of inspection and how thoroughly the flue has to be examined. These are typical ranges, and the written estimate you get before any work sets the final number.
| Item | Typical range in Ceres |
|---|---|
| Level 1 visual chimney inspection | $75 – $200 |
| Level 2 camera inspection | $150 – $350 |
| Post-chimney-fire inspection and cleaning | $200 – $600 |
Can a cracked flue tile in a 1960s Ceres house wait until spring?
Sometimes yes, if the crack is minor and the flue isn’t actively venting into the structure. But cracks in a 40 to 60 year old clay flue tend to widen, and carbon monoxide doesn’t wait for a convenient season. Call (855) 360-6515 for an exact quote – estimates are free.
Do you inspect for tule fog draft problems specifically?
Yes. Poor draft in Ceres often comes down to a failing cap, a short flue, or a blocked smoke chamber, and all of those show up during an inspection. We check cap integrity and draft together because the winter inversion makes both matter here.
Brands We Service in Ceres
Our repair work uses professional-grade components from names chimney professionals specify nationwide, including DuraFlex liner systems, HeatShield flue resurfacing, and caps and covers from Gelco and Copperfield. We don’t claim to stock parts in Ceres; materials are ordered to the specification of your job. Turnaround on most repairs is quick once the inspection is done. You can see the materials we work with on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Ceres, CA
These are typical ranges for the work we do most in Ceres. Every job is priced individually by the written estimate, which you get before any work begins.
| Service | Typical range in Ceres |
|---|---|
| Level 1 visual chimney inspection | $75 – $200 |
| Level 2 camera inspection | $150 – $350 |
| Standard chimney sweep | $120 – $250 |
| Chimney sweep with inspection | $180 – $350 |
| Post-chimney-fire inspection and cleaning | $200 – $600 |
| Chimney cap installation | $150 – $450 |
| Crown repair | $250 – $700 |
| HeatShield flue resurfacing | $600 – $2,500 |
| DuraFlex chimney relining | $1,800 – $4,500 |
| Masonry repair and repointing | $300 – $1,500 |
In Ceres, price climbs when the work moves from cleaning into structural repair: relining a flue is a different job than sweeping one, and a failed crown on a 1960s brick chimney adds its own line to the estimate. We keep the price upfront and in writing, so the number you agree to before booking is the number on the invoice.
Neighborhoods We Serve in Ceres
We work throughout Ceres, from the older blocks near downtown and along the 95307 corridor to the newer edges of town, and the housing tells us what to expect before we arrive. In the mid-century ranch and stucco homes here, we plan for original masonry fireplaces and clay tile flues that have had decades of use. On the newer homes we plan for prefab systems and their own inspection needs.
Response to Ceres is quick given how close the town sits to the surrounding valley, and appointments are booked into the next opening Sunday through Friday.
- Downtown Ceres
- The older ranch blocks along the 95307 corridor
- Neighborhoods near Ceres High School
- The newer subdivisions on the town’s edges
Service Area – Cities Near Ceres
Ceres sits in a cluster of small Central Valley towns, and we serve the homes around it as well as the ones in town. If you’re just outside Ceres, you’re not out of range. We also work in Keyes, CA, Bret Harte, CA, Bystrom, CA, and Empire, CA. Each of these communities has its own mix of era and housing, and the inspection focuses on what’s actually there. Wherever you are nearby, the process is the same: we inspect, we show you what we find, and we quote the price before any work.
Serving Ceres, CA – Our Local Coverage Area
We serve Ceres and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Ceres
We book Ceres appointments into the next available opening, and response to the town is quick given its proximity to the surrounding valley. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 360-6515 to schedule.
Chimney relining and structural masonry repair often require a permit, depending on the scope, so it’s worth asking your local building department before work starts. We can walk you through what a given job involves. Call (855) 360-6515 and we’ll point you in the right direction.
Yes. We serve all of Ceres, from downtown to the newer subdivisions, and the surrounding communities as well. If you’re not sure whether your address is in range, call us. The estimate is free and there’s no obligation.
If your Ceres home has a fireplace that hasn’t been looked at in years, the first step is an inspection, not a sweep. Call (855) 360-6515 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ceres Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Kevin Walsh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Nicole Ackerman"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Claudia Flores