Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Modesto Homeowners
Most chimney problems in Modesto start small and get expensive because nobody looks inside the flue until the fireplace starts smoking or water stains show up on the ceiling. Cracks in a clay liner, a rusted cap, or a crown that has pulled away from the masonry give moisture and heat an easy path into the structure. Our technicians have up to 9 years of experience, and we handle inspection, sweeping, and repair as one crew so nothing found during a cleaning gets put off to a second contractor. Same-day repair is often possible when you call early. Reach us at (855) 360-6515 and we’ll book a free estimate.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a covered top over the flue that keeps rain, birds, squirrels, and debris out while letting smoke and gases escape. You need one when the flue is open to the sky, when birds nest on top of the damper, or when the existing cover is missing or makeshift. We install caps from Gelco and Famco product lines, sized to the flue so the fit is snug and weather-tight. Typical chimney cap installation in Modesto runs $150-$450 depending on flue count and cap style, with the written estimate setting the final price.
Why an Open Flue Costs You Later
An uncapped flue takes on rainwater during the wet months, and that water runs down the inside of the liner and pools at the smoke shelf. Over time it rusts dampers, rots the firebox mortar, and pushes moisture into the masonry itself. A cap stops the problem at the top before it becomes a repair lower down.
Cap Styles and Fit
Single-flue, multi-flue, and prefab caps each fasten differently, and a cap that sits too loose rattles off in valley wind. We measure the flue opening and match the cap to the actual dimensions rather than fitting a universal size. Stainless and powder-coated steel hold up better here than thin galvanized sheet.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is swapping out a cap that has rusted through, bent, blown loose, or no longer fits the flue after a liner job. You need it when rust streaks stain the roof, when the screen mesh is torn open, or when the cap rocks in the wind and lets water in around the edges. We pull the old unit, check the flue top for damage underneath, and set a new Gelco or Famco cover. Chimney cap replacement in Modesto typically runs $150-$400 depending on the size and material, with the estimate fixing the final price.
Rust and Mesh Damage
Cheap steel caps rust at the seams first, and once the mesh tears, birds and squirrels get straight into the flue. A torn screen is also a fire hazard when nesting material builds up against the liner. Replacing the cap early costs far less than clearing a blocked flue.
Checking the Flue Top First
A cap does not fail on its own; heat, moisture, and a damaged crown underneath all shorten its life. Before we set a new cap we look at the flue tile edges and the crown surface for cracking. If the crown needs work, it gets priced into the same visit.
Chimney Liner Installation
Chimney Liner Installation is fitting a new flue liner inside the chimney to contain heat, protect the masonry, and carry smoke and gases safely up and out. You need it when the clay tiles are cracked or spalling, when gaps open at the joints, or when a new appliance calls for a correctly sized flue. We install DuraFlex flexible liner systems, a professional-grade relining solution most sweep-only companies don’t offer, and we can pair it with HeatShield flue resurfacing where the liner is compromised but the chimney doesn’t need tearing out. Chimney liner installation in Modesto runs $2,500-$6,500 depending on flue height and appliance, with the written estimate setting the price.
Clay Tile Versus Stainless
Original clay tiles crack from heat cycling and settle over the years, and a cracked tile lets combustion gases into the wall cavity. A stainless flexible liner runs a continuous tube with no joints to fail. DuraFlex liners are sized to the appliance so draft stays correct.
When Resurfacing Beats Replacement
HeatShield is a factory-engineered resurfacing product applied to the inside of a damaged flue, restoring the liner without demolition. It carries its own manufacturer warranty and works well where the original liner is still structurally sound but cracked. When the damage is too deep, a full liner installation is the right call.
Chimney Flashing Repair
Chimney Flashing Repair is the work of resealing the metal collar where the chimney meets the roof, the joint most leaks start from. You need it when you see water stains on the ceiling near the chimney, rusted or lifting flashing, or a gap where the roof meets the masonry after heavy rain. We reset or replace the flashing, seal the edges with proper roofing materials, and check the counter-flashing set into the masonry. Chimney flashing repair in Modesto typically runs $300-$800 depending on roof pitch and how much of the flashing needs replacing, with the estimate setting the final price.
Telling a Roof Leak From a Flue Leak
Water near the chimney can come from the flashing, the crown, or the flue itself, and guessing wrong means paying twice. We trace the moisture path with the chimney from the top down. A camera look inside the flue confirms whether the liner is also involved.
Why Flashing Pulls Loose
Roof movement and years of sun and rain work the flashing edges loose, and once a gap opens, water gets behind it. A chimney with no cricket on the uphill side takes more water than it should. We check the whole joint, not just the visible metal.
Chimney Crown Repair
Chimney Crown Repair is fixing the sloped concrete cap at the top of the chimney that sheds water away from the flue. You need it when the crown is cracked, crumbled, or pulling away from the flue tiles, which lets water soak straight down into the masonry. We remove the failing material, rebuild the slope so water runs off, and seal the joint around the flue. Chimney crown repair in Modesto runs $250-$700 depending on crown size and the amount of rebuild needed, with the written estimate setting the price.
How a Cracked Crown Leads to Bigger Repairs
Water entering at the crown soaks into the brick and mortar below, and the valley’s dry summers hide the damage until the wet season. Freeze damage isn’t the issue here; it’s the slow soak and dry cycle that spalls brick faces. Fixing the crown early protects everything underneath.
Rebuilding the Slope
A flat or back-pitched crown holds water instead of shedding it, and that’s the root of most crown failures. We form a proper slope toward the drip edge so runoff clears the masonry. A good crown also keeps the flue tiles from soaking up moisture at the top.
Chimney Repair Companies
Chimney Repair Companies vary widely in scope, and the ones that only clean can’t diagnose or fix what they find inside the flue. You need a repair company when the sweep or inspection turns up liner cracks, masonry damage, a failing crown, or a leak you can’t trace. We handle all three core services – inspection, sweeping, and repair – so the same crew finds the problem and fixes it. Chimney repair work in Modesto falls across a wide range, and the estimate given for your job is what sets the final price.
What Full-Service Really Means
Full-service means the crew that inspects your flue also does the relining and masonry repair, so you aren’t coordinating two contractors. We install DuraFlex liner systems and apply HeatShield resurfacing, capabilities most sweep-only companies can’t offer. One crew from start to finish.
Questions to Ask Before You Hire
Ask whether the company handles repair work in-house or subcontracts it, and what materials they’ll install. Ask whether they carry product warranties from the manufacturer on liners and caps. If a quote arrives without a camera inspection, ask to see what they found.
Chimney Masonry Repair
Chimney Masonry Repair is the fix for damaged brick, mortar joints, and the firebox itself – repointing, replacing spalled brick, and rebuilding the firebox where mortar has crumbled. You need it when mortar joints are recessed and sandy, when brick faces are flaking, or when the firebox brick has cracks. We repoint joints with the right mortar mix, replace failed brick, and rebuild fireboxes so they hold up to heat. Chimney masonry repair in Modesto runs $500-$3,500 depending on the extent, with the written estimate setting the final price. Tuckpointing near the roofline or at the firebox is the most common call.
Repointing Versus Rebuilding
Repointing grinds out the old mortar and packs in new, which restores the joint without touching sound brick. A rebuild happens when the brick itself has failed and the chimney can’t hold its shape. Most masonry work we see falls into repointing.
Firebox and Smoke Chamber
The firebox takes the most heat of any part of the chimney, so its mortar breaks down first. Cracks there let heat into the masonry and can pull smoke into the room. Repairing the firebox is part of keeping the whole system safe.
Brands We Service
We work with DuraFlex flexible liner systems on relining jobs, and we know where these liners wear – at the top plate, the appliance connection, and any bend in the run. DuraFlex is a professional-grade product specified by chimney industry professionals, and we install it to the manufacturer’s requirements so the warranty holds. We also apply HeatShield chimney resurfacing, which carries its own factory warranty.
For caps and components, we source from Gelco, Famco, Copperfield, and Olympia Chimney, brands that hold up in the Central Valley climate. Whether you have DuraFlex or any other make in your chimney, we can help – and if you’re not sure what’s installed, we’ll tell you what the inspection shows.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney exterior. Water marks near the chimney usually mean flashing, crown, or cap trouble, and moisture in the masonry gets worse each wet season. A quick look now saves opening up the wall later.
- Cracked or flaking flue tiles. Cracked tiles let heat and combustion gases reach the wood framing, which is a fire risk you can’t see from the room. A camera inspection shows exactly how bad the liner is.
- Strong smoke smell or smoke rolling back into the room. Backdraft and smoke spillage point to a blocked flue, a crack, or a liner sized wrong for the appliance. It usually gets worse with cold weather.
- Crumbling mortar joints or loose brick. Recessed mortar and flaking brick faces mean the masonry is losing its grip, and the damage moves faster once water gets in. Repointing early costs far less than a rebuild.
- A missing or damaged cap. Birds, squirrels, and rain get straight into an open flue, and nesting material against a hot liner can catch fire. Replacing the cap is one of the cheapest fixes we do.
Our Process, Step by Step
- 1
Free estimate and call booking. You call (855) 360-6515, we talk through what you’re seeing, and we book a visit. We give a written estimate before any work starts, so you know the price up front.
- 2
Inspection before we sweep. We inspect first, because cleaning a damaged flue without fixing it first is a safety risk, not a service. Our technicians have up to 9 years of experience and use a camera to look the full length of the flue, then show you what it found.
- 3
Honest diagnosis and options. We explain what needs fixing, what can safely wait, and the cost of each path. You’ll see the camera footage so you can decide with facts, not a sales pitch.
- 4
Repair with professional-grade materials. Depending on the findings, that might be a DuraFlex liner, HeatShield resurfacing, Gelco or Famco caps, or masonry repointing. We don’t do hardware-store patches.
- 5
Final check and warranty. We test the appliance draft, confirm the repair holds, and hand over the manufacturer warranty paperwork. Product warranties travel with every completed repair.
How Much Does Chimney Repair Cost in Modesto?
A typical chimney repair in Modesto runs from around $150 for a simple cap job up to $6,500 for a full liner installation, and most jobs land in the few-hundred to low-thousands range. A crown repair runs $250-$700. Flashing repair is typically $300-$800. Masonry repointing and firebox work is $500-$3,500 depending on how much of the chimney is affected. Liner installation is the biggest single item at $2,500-$6,500, driven by flue height, appliance type, and whether resurfacing can replace a full reline.
What affects the price most is the scope the camera inspection reveals. A cracked crown is cheap; water that’s already soaked into the masonry is not. Flue height and roof pitch affect labor on anything done at the top. Access to the firebox and appliance type shift the cost of relining.
To avoid overpaying, get a written estimate that itemizes each repair and ask what can safely wait. We tell you when work isn’t urgent, so you’re not sold a rebuild you don’t need. Nothing is recommended without camera evidence you can see for yourself.
Our free estimate includes the inspection, the camera footage, and a written price. There’s no diagnostic fee, and the estimate is what sets the final price. We also offer Modesto Chimney Sweep service for routine cleaning, and you can book both in one visit.
Our Service Area Near Modesto
We serve homeowners across Modesto and the surrounding towns, including Bystrom, West Modesto, Bret Harte, Ceres, Empire, Riverbank, Keyes, Hughson, Oakdale, Turlock, and Waterford. Dispatch runs Sunday through Friday, 7am to 7pm, so most nearby jobs can be booked within a day or two. If you’re just outside these towns, call and we’ll talk through the drive. For a larger job, see our chimney repair page for how we handle Bystrom homes.
Serving Modesto, CA – Our Local Coverage Area
We serve Modesto and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Modesto
Chimney repair covers any fix to the flue, masonry, crown, flashing, cap, or firebox that restores safe function. It ranges from a cap replacement to a full DuraFlex liner installation. The starting point is always an inspection so we know what needs fixing. Call (855) 360-6515 for a free estimate.
Most repairs take a few hours, while a full liner installation or masonry rebuild can run one to two days. A cap replacement or flashing repair is often done the same visit as the inspection. We tell you the expected time when we give the estimate. Call (855) 360-6515 to book.
Most chimney repairs in Modesto run from $150 for a cap up to $6,500 for a full liner installation, with crown repair at $250-$700 and masonry work at $500-$3,500. The camera inspection and written estimate set the exact price. Call (855) 360-6515 – estimates are free.
Yes, we install and service DuraFlex flexible liner systems, along with HeatShield resurfacing and caps from Gelco, Famco, Copperfield, and Olympia Chimney. Whether you have DuraFlex or any other make, we can help. Call (855) 360-6515 to book an inspection.
Same-day repair is often possible when you call early, and we answer 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening. Call (855) 360-6515.
Product warranties from the manufacturer travel with every completed repair, including DuraFlex liners and HeatShield resurfacing. We hand over the warranty paperwork when the job is done. Call (855) 360-6515 for the details.
Clear the area in front of the fireplace and take anything breakable off the mantel. Make sure we can reach the roof access and the chimney from outside. If you know what appliance vents through the chimney, tell us when you book. Call (855) 360-6515 with any questions.
Schedule Your Chimney Repair Service in Modesto Today
If you’ve spotted water stains, smoke spillage, or crumbling mortar, the sooner we look, the less the repair tends to cost. Call (855) 360-6515 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 9 years of experience and will show you exactly what the camera finds. One crew handles the inspection, the sweep, and the chimney repair, so you’re not juggling contractors.
Written by the team at Modesto Chimney Sweep.